Suzuki PE175 Specifications

Written by phil whitmer
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Suzuki PE175 Specifications
The Suzuki PE175 is a classic off-road competition dirt-bike. (dirt biking image by Morkidz photography from Fotolia.com)

The Suzuki PE175 is a competition enduro class motorcycle made by Hamamatsu, Japan-based Suzuki Motor Corporation from 1978 to 1984. The high fender-clearance dirt-bikes came with stock full-knobby, off-road tires.

Other People Are Reading

Engine

The 1979 Suzuki PE175 came with a two-stroke, single-cylinder, power-reed-valve 172cc engine. Its bore is 62mm with a stroke of 57mm and a compression ratio of 7.6:1. It has a Mikuni VM34SS carburettor and used an oil-to-gas mix ratio of 20:1. It has a primary kick starter with pointless electronic ignition.

Chassis

The PE175 has a telescopic, oil-dampened front fork with 9.1 inches of travel and rear box-section, swing-arm suspension with 7.9 inches of travel. The gas-oil shocks have three different load settings. The bikes have a six-speed, constant-mesh transmission with a wet, multi-plate clutch and a shift pattern of one down and five up. It has expanding-type brakes on the front and rear.

Dimensions

The PE175 model is 82.7 inches long, 34.6 inches wide, with a height of 47.2 inches and a wheelbase of 55.9 inches. The bike's dry weight is 98kg. and it has an 11-inch ground clearance.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.