What to Clean Stained Rain Gutters With

Written by robert fergeson
  • Share
  • Tweet
  • Share
  • Pin
  • Email
What to Clean Stained Rain Gutters With
(kahanaboy/morguefile.com)

Gutters can become stained with unsightly dark lines, which can be difficult to remove. These marks, called "tiger stripes," are caused by a variety of reasons. Roofing tar and asphalt can leach down on the gutter, while dirt, mould and pollutants can become electrostatically bonded to the gutter's paint. Removal requires the right chemicals and a bit of work.

Other People Are Reading

Considerations

Gutter cleaning requires working from a ladder, so be careful of the ladder's footing, and how much weight is placed on the gutter. A stabiliser bar is a good choice because it will keep the ladder's weight on the roof or wall and off the gutter. Be careful of electrical lines and trees. Wet any underlying vegetation, concrete or decks as well as the walls beneath the work area. This will prevent staining and plant damage.

Types

Gutters come in several types, including vinyl, aluminium and painted surfaces. Vinyl and painted gutters are harder to clean, while painted ones need careful attention to avoid removing the paint. Make sure the cleaner you choose is recommended for your gutter type. If painted gutters show wear or bare metal, repaint and allow to dry before cleaning.

Cleaners

F-13 Gutter Grenade is a multipurpose gutter cleaner that's safe for all types of gutters. It attacks the oxidation and not the paint or material. For aluminium, try Gutter Zap, which removes electrostatic bonded streaks with little scrubbing. Simple Green makes a concentrated environmentally safe cleaner with good stain removing properties. Be sure to follow the manufacturer's instructions and recommendations for any cleaner.

Technique

Wet the gutter with a garden hose after pre-wetting the area. Apply the chemical according to the manufacturer's instructions. Brush the gutter with a stiff bristle brush. On stubborn streaks, let the chemical dwell longer, being careful not to let it dry. Rinse with water, and if necessary reapply the chemical to remaining stains and brush again. Be sure to rinse all plants and grass, the house walls and siding, and all decks or walks of any chemical too.

Warnings

Never let your chemical dry on the gutter. If it does, re-wet and brush again to prevent leaving brush marks. Always test a small inconspicuous spot with the chemical before starting to ensure desired results. Sensitive plants beneath the gutters can be covered with plastic sheeting after wetting to protect from the chemicals.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.